PRICED PER METRE.
We are QED approved dealers so you can be assured of a genuine product backed by full manufacturer LIFETIME GUARANTEE.
QX16/4 LSZH is a high performance and exceptional quality bi-wireable oxygen free copper installation speaker cable with the added bonus of a fully certificated LSZH fire rated design. They deliver excellent levels of performance in all multi-room and home cinema installations.
LSZH cables are made from a special compound that performs as well as PVC insulation, but crucially gives off very little smoke and no halogen toxins in the event of a fire. It is now a standard requirement in building regulations that any newly installed speaker cable must be Low Smoke Zero Halogen (LSZH). LSZH cable is only available in pink to make it easy for building inspectors to see if the correct cable is installed.
Basically, if it isn’t pink it doesn’t comply.
QED are the industry leaders in speaker cable so not only is this oxygen free copper cable the safest out there, it also provides amazing sound. This is the cable used by installers everywhere.
- Large cross sectional area of high purity copper conductors ensures good performance levels are maintained even on longer runs
- LSZH (Low Smoke Zero Halogen)
- High performance outer jacket exceeding IEC332-1, IEC60754 and IEC60754-2
- Can also be purchased in 100m and 300m bulk reels
- Colour coded pink sheath for new-build installation
- Perfect for in-wall or in-ceiling use
- Colour coded conductor sheaths
- Sequentially metre marked
- Outer Diameter 7.2mm
- Conductor Size 16 AWG
- Conductor Construction 30/0.25
- Conductor Resistance 13.3 Ω/km
- Conductor Cross-sectional Area 1.5 mm2
LOW SMOKE ZERO HALOGEN (LSZH)
Most cables feature PVC insulation, some have a basic fire rating such as CL3, etc. Unfortunately, most cables give off hazardous toxic smoke during a fire, posing a very serious health risk.
LSZH cables are made from a special compound that performs as well as PVC insulation, but crucially gives off very little smoke and no halogen toxins in the event of a fire.
Many leading architects and builders along with commercial and marine designers are now specifying LSZH spec cables as standard.
Each complete QED Professional cable design is fully tested to LSZH standards and reports are available on request.
QED don’t just use a fire rated jacket material over an ordinary cable assembly; each complete cable design including jacket and all internal conductors has to undergo rigorous fire safety testing to the following standards:
Measurement of smoke density of cables burning
under defined conditions.
Test for vertical flame propagation for a single insulated wire or cable.
(Amendment1, 1997) test on gas evolved during combustion of electric cables.
Only LSZH cables meet the legislated fire specifications for boat installations.